Once the workshop is functional, I have a long list of projects that I've been hoping to start working on.
Here is a tentative list for starters.
cider press
solar dehydrator- Appalachian State University design
solar dehydrator- Larisa Walk design
solar panel ground mount frame
root cellar trusses
sapling puller
log hauler
slow sand water filter
chicken pasture tractor
outdoor oven steel components
a bike power module- bike, gears, flywheel, and support frame. This will be the power supply for a collection of bike powered, farm scale devices.
apple grinder
water pump
grain thresher
grain mill
I have a couple other, far out ideas, but those I'll save for when I get through these.
Thursday, October 31, 2013
Saturday, October 26, 2013
Solar concentrating
This post is in response to a call put out on a web blog I follow, asking for appropriate technologies for the energy constrained future. I am calling the generic concept descent engineering, and here is the idea I explored.
An idea for Krampus:
Idea: high temperature processing
The problem: Maintaining an ability to make materials
requiring high temperature processing when fossil fuels are no longer available
and a high technology culture and infrastructure are no longer functional.
Summary:
Two of the primary materials we currently use in our built
infrastructure are cement and steel. Metallic tools and devices are also
integral to a technic society. These are very energy intensive materials to
make. The idea of using concentrated solar energy is explored in this paper,
and a description of a proposed facility and associated technology is described.
The scenario where this facility would be appropriate is a future in
which a salvage economy would provide raw materials, and knowledge of metallurgy
and related technologies have been preserved.
Current status of
technology:
The linked article has a good overview of the general concepts
involved, and links to information on the two largest facilities built to date.
Solar heat concentration is scalable, so one decision to make is what size is
needed for the most likely batch or process in mind, and reasonable to build
with limited resources in a future energy constrained world.
The solar furnace at Odeillo, France , built in 1969, is currently the largest solar
furnace built, and did research for a
number of years. http://en.wikipedia.org/wiki/Solar_furnace
Another similar sized furnace was built in Uzbekistan in the
80’s, and is also no longer in service.
They both used modern technology for tracking and process
control. Odeillo reaches temperatures of 6330 F, which is much more than needed
to melt ferrous metals.
Overall facility description: A high temperature processing
facility would be a large investment , with the main support structure for the
parabolic concentrator being on the
order of 50 meters tall and 50 meters wide. While the future capacity need is
uncertain, it is unlikely that very many would be justified. The main components are the array field, the
large parabolic concentrator, and the focal receiver. The engineering challenge
is to design a solar furnace facility similar to the existing ones, but
assemble and operate it in a technology and resource constrained world.
There are other high temperature applications this facility
could be used for also, further justifying the effort to build it. For example,
photochemical processing, http://www.pre.ethz.ch/publications/0_pdf/books/Solar_Thermochemical_Process_Technology.pdf
photo catalytic processing, and high temperature ceramics
Assumptions on design
limitations:
The facility should be designed to enable replication of its
constituent components. Smelting and
making steel structural members, heating limestone to make lime or cement, and
melting sand to make new mirrors are all things that a solar furnace would be
able to do.
Sizing the facility for reasonable production levels: Sufficiently high temperature is only part of
the sizing question. Sufficient total
heat available will define how much mass can be brought to smelting
temperature, so maximum rate and total BTU collected in one day will govern the
batch size.
Batch processing: Due to the high temperatures needed, it is
not envisioned that a solar processor would store heat in some medium for long runs
like CSP steam generation plants do now, rather the unit would need to be
designed for single day batch runs. This implies batch limits based on the
processing time and time to bring the mass up from ambient to processing
temperatures. This will be the main variable for sizing the collector field and
parabolic concentrator. The Odiello facility has a concentrator of 1800 square
meters, and 63 heliostats.
Utilization of unused heat: For periods when insolation is
not adequate for smelting or limestone calcination, it might still be collected
and used for lower temperature activities and thermal heat storage. A facility
like this would lend itself to the concept of collocated industry, where
synergies in energy use and material streams are optimized. District heating
schemes, common in Europe now, might also be a side benefit.
Location criteria: Locating a solar processing furnace would
of course primarily driven by maximum solar insolation. A south facing slope of
the site would help with efficient land use and mirror placement. Proximity to
raw materials would be important also. Limestone deposits would be needed for
making lime or cement, and steel or iron nearby would minimize transport costs.
Mining the ruins of Las Vegas might well be a good first location.
Smelting steel: Steel is relatively straightforward to melt,
but assuring the ability to obtain the desired metallurgy and mechanical
properties would necessitate some ways to get the alloying mix right without
modern instrumentation. Reference books explaining early steel works, which
relied on visual indications, would need to be secured, studied, and the
methods practiced. One advantage of solar heating for smelting scrap is that it
does not introduce any impurities into the charge. This link shows that the
knowledge to do alloys without modern instruments is available, but needs to be
collected and the skills relearned.
example of “low tech” steel making
To effectively control alloy content, scrap and salvage
would need to be categorized and then blended to get the intended mixture in
the melt. This will require coordination with scrap and salvage
businesses.
Solar heating: A key engineering challenge will be figuring
out how to direct the solar ray onto the mass with a high efficiency, while
controlling and monitoring the melt. Also, a solar field geometry similar to
Odiello will have the rays coming in to the focus area horizontally, but a
crucible full of melting or molten steel will need to be oriented vertically,
with continuous sides in order to contain the liquid.
Making lime and cement:
The need for cement and lime as building materials in a future energy
decent era would be less than now, but there will be specific applications
where it would still be worth the investment of energy. Some buildings in this future might well
revert to a long term sustainable design approach based on stone and lime, with
high initial effort to build, but with a lifetime measured in centuries. Cement,
and resultant concrete, being a rather
short lived material, may recede in use.
links on making cement and lime:
This last linked article is specifically about the design
parameters and economics of making lime with a solar concentrator.
Allayed necessary
technologies:
Making mirrors: A facility like this would need to be self
replicating in some respects. One aspect would be making new mirrors for
replacements or to build another facility. The following links show methods of
making plate glass with relatively simple methods, as well as silvering the
glass.
how to make plate glass
silvering glass to make mirrors
Tracking: Without
current electronic control systems, based on plc controlled stepper motors,
sensors, and machined mechanical components, tracking would need to be done
with simpler methods. Clockwork type mechanisms have been used in the past to
aim small heliostats, so some design work would need to be done to make a
large, strong actuator that could withstand transient wind loads and maintain
adequate accuracy. It may well be that a combination of clockwork mechanism
with some daily human adjustment would end up being the optimal way to solve “low
tech” tracking.
Crucible melting ferrous metals
making refractory materials adequate to contain steel
smelting is a challenge that needs research. Current crucible materials are
based on very specific chemistry and processing, and I have not yet found a low
tech alternative.
Subscribe to:
Posts (Atom)